So I am wanting to install a new SSD for my desktop... Can I use a USB3.0 to SATA Adapter cable to connect the SSD and then reinstall Logos onto the new drive?
The SSD is a Crucial BX500 2.5 SSD 480GB. The desktop is an Optiplex 990 small form. Windows 10.
If you have an open SATA, you should install with that. Otherwise, the USB might work.
Dale E Heath: If you have an open SATA, you should install with that. Otherwise, the USB might work.
Forgive my tech ignorance, but is an "open SATA" the same as a standard SATA - a non-USB?
Jordan Litchfield:but is an "open SATA" the same as a standard SATA
Yes - but do you have a spare SATA port? The specs for your computer suggest that the hardware is restricted to USB 2.0 and SATA 2 which will limit the speed of your SATA 3 SSD. So you are into a world of compromise, of which the USB 3 option would require a USB 3 PCIe card as well as the special cable.
Why have you not considered cloning the existing drive onto your SSD?
Dave===
Windows 10 & Android 8
SATA is how data drives are normally connected. Most desktops will have 2 or 4 SATA ports, with # 1 being used by the hard drive. A DVD drive may use # 2 or USB. If # 2, # 3 or # 4 aren't being used, that's the way an additional drive would connect. Do a Google search on how do I attach an SSD to a desktop. There are several threads in the Logos Forum that discuss this topic.
https://www.crucial.com/usa/en/ssd-install-1
Thanks to everyone for the input. I am now trying to clone the hard drive following the steps on Crucial, but I keep getting a message that the cloning has failed and to look at the log for more info. However, despite selecting help in the program (Acronis) and going online, I cannot figure out where to find the logs.
Despite the initial impression I got from Crucial that this shouldn't be too complicated, I am realising that I am probably not technically proficient enough to do it on my own. I probably need to take it to a professional and get it done properly.
There can be problems if the original drive is bigger than the SSD, so you need to delete files/folders to ensure the data will fit on the smaller drive. There could still be problems, though, so take it to a professional.