Inline Interlinear stopped working in ESV

This morning when I opened up my reading plan (ESV with inline interlinear) the interlinear did not show. The "Display" tab has inline checked as well as other choices. The interlinear panel under the text works OK. When I switched to the NASB it works fine. I tried closing the program with the "Display" "Inline" box unchecked then restarting and checking the "inline" box - still did not show up.

Thanks in advance for any help - Mike

Find more posts tagged with

Comments

JimTowler

Hi Mike.

I had reported this about 2 days ago, for for the Beta version I've been testing. Others report the same issue.

Logos has already picked up on my bug report, so will be looking into a fix for the issue.

It would be helpful if you could reply here with the version you are using (on the Help "About Logos Bible Software"), so Logos can be sure if it impacts the main Release version as well as the Beta one.

So far, in the thread reporting this for the Beta version, there is no workaround or way to get it to work again. Other Bible Reverse Interlinears seem to still be OK, so I hope you can get by on one of the others until ESV is sorted.

I expect Logos will see your report here on Monday, and I hope a solution may be quite soon.

- Jim

steve clark

https://community.logos.com/discussion/comment/135414#Comment_135414

Not working in L4 ver 4.0cSr1. [:(]

Mike

https://community.logos.com/discussion/comment/135414#Comment_135414

Here is what I have: 4.0c SR-1 (4.03.3.9838) running on Windows 7 64bit

Thanks for the reply Jim - Mike

David A Egolf

https://community.logos.com/discussion/comment/135418#Comment_135418

I just checked since ESV is my version of choice. The "Inline" box had been unchecked because I do not normally run interlinear.

I am also running L4 ver 4.0cSr1.

I successfully turned on interlinear by clicking the check box. I also tried several combinations of check boxes. All worked well. I was also able to turn interlinear off and back on.

Stephen DeKuyper

https://community.logos.com/discussion/comment/135414#Comment_135414

Same for me:

Logos Bible Software 4 (Pre-Release Alpha 21) (4.05.4.0240)

Stephen Kao

https://community.logos.com/discussion/comment/135583#Comment_135583

Same here logos version 4.0c SR-1 4.03.3.9838

resource version:

LLS:1.0.710
2010-04-28T18:39:01Z
ESV.logos4

RVI:ESVNT
2010-04-28T14:02:55Z
ESVNT.lbsrvi

RVI:ESVOT
2010-04-28T14:15:18Z
ESVOT.lbsrvi

Suzy

Me too. Not working since yesterday (Australian time)

Logos 4.0c SR-1 (4.03.3.9838)

No doubt those hard working techs will have it fixed soon after the weekend.

Regards to all

Sue

Jonathan Burke

https://community.logos.com/discussion/comment/135665#Comment_135665

Same. Logos 4.0c SR-1 (4.03.3.9838), Win7 Ultimate 64 bit.

Georgia Schoelz

https://community.logos.com/discussion/comment/135673#Comment_135673

This happened to me also a couple days ago. Inline interlinears not working are ESV, NIV, and NLT. Others seem to be working. Running Logos 4.0c SR-1 (4.03.3.9838) on Windowns 7, 64 bit system.

Melissa Snyder

https://community.logos.com/discussion/comment/135890#Comment_135890

Per development, this was a metadata problem on the metadata service. The metadata has now been updated, so restarting Logos 4 twice should resolve the problem. If you still don't see the interlinear lines, wait 10-15 minutes.

Georgia Schoelz

https://community.logos.com/discussion/comment/135890#Comment_135890

Yes! ESV inline interlinear is now working! However, the NIV and NLT are still not, but I don't use them too much anyway. Thanks for getting the ESV back!

Suzy

Thank you. The ESV, NIV and NLT interlinears all working fine for me now [:)]

Mike

https://community.logos.com/discussion/comment/136113#Comment_136113

ESV inline Interlinear is back - Thank You