If anyone is interested I have completed diagramming two chapters of James. I built the diagrams in L3 but they easily transfer into L4.
Email with your address if you're interested.
Terry Cook
sg
I am interested.......thanks
luvmath03 at yahoo
mikesale at the yahoooooo dot commercial address
Thanks, Terry.
wmadan at sbcglobal dot net
Thank you very much, Terry!
Your diagrams have been truly excellent!
I would very much appreciate the latest!
ACanadianJournay at AOL dot com
Philippians 4: 4 Rejoice in the Lord always; again I will say, Rejoice. 5 Let your reasonableness be known to everyone. The Lord is at hand..........
thepreacher29 at yahoo . com
joelum at hotmail - thanks!
Thank you for your efforts, I have enjoyed the other two of yours that I have!
Pls send to my name <.....>
Thank you!
There have been more replies than expected so I have attached two zip files to this post. Remember these were built using L3. You have to add them to your L3 and then import them into L4. Should you have any problems let me know.
Comments and suggestions are appreciated.
Terry sDg
4186.JAMES 3-2.zip4405.JAMES 4-2.zip
Terry,
I would interested in looking at your diagramming of James.
Thanks
Mike
Terry Cook:Remember these were built using L3. You have to add them to your L3 and then import them into L4.
Thanks Terry for sharing these!
Actually you don't need Logos 3 installed to get these into Logos 4. Here is what I did, on a computer running Logos 4 only and not Logos 3.
1. Create a folder under your Documents folder (varies where that is if you are XP/Vista/Win 7), named "Libronix DLS\SentenceDiagrams". Note there is a space after Libronix and before DLS, and NO SPACE in SentenceDiagrams.
2. Unzip the sentence diagrams into this folder
3. Bring up Logos 4, and from the Command Box type "Import All". You'll see the command show up below the box, click it. In the right hand corner next to where the spinning circle shows sync'ing, you'll see it say "Importing". When it disappears, it's done.
4. Click on File, and you will see the newly imported Sentence Diagrams at the top of the list!
Dominick Sela: Terry Cook:Remember these were built using L3. You have to add them to your L3 and then import them into L4. Thanks Terry for sharing these! Actually you don't need Logos 3 installed to get these into Logos 4. Here is what I did, on a computer running Logos 4 only and not Logos 3. 1. Create a folder under your Documents folder (varies where that is if you are XP/Vista/Win 7), named "Libronix DLS\SentenceDiagrams". Note there is a space after Libronix and before DLS, and NO SPACE in SentenceDiagrams. 2. Unzip the sentence diagrams into this folder 3. Bring up Logos 4, and from the Command Box type "Import All". You'll see the command show up below the box, click it. In the right hand corner next to where the spinning circle shows sync'ing, you'll see it say "Importing". When it disappears, it's done. 4. Click on File, and you will see the newly imported Sentence Diagrams at the top of the list!
Thanks for your method.
2 Peter 3:18 But grow in the grace and knowledge of our Lord and Savior Jesus Christ. To him be the glory both now and to the day of eternity. Amen.
I have windows 7 and cannot get it to accept the backward slash (\) any ideas?
If not, don't worry about it. I have Logos3.0g on my other computer whose OS is XP, and tomorrow I can download it to that computer, then import.
Thanks for at least considering it! *smile*
I can't get this to work on my Mac. I've tried everything! Someone please help!
Milford Charles Murray: I have windows 7 and cannot get it to accept the backward slash (\) any ideas?
Do you mean you cannot create the Libronix DLS\SentenceDiagrams folder? I have Windows 7....are you sure you are using a \ and NOT a / slash? It makes a big difference...
Do this to avoid using the \:
1. Bring up File Explorer.
2. In the right panel, right click and click on New. A little panel will appear to the right, click on Folder. It will show a folder with New Folder as name, all highlighted. Type Libronix DLS (with the space) and hit enter.
3. Now double click on that folder, to go to it. Should be empty.
4. Right click and click on New. A little panel will appear to the right, click on Folder. It will show a folder with New Folder as name, all highlighted. Type SentenceDiagrams (with NO space) and hit enter.
Now you have the place to unzip the files to. If that fails, please post the specific error it gives you.
Jerry Walker: I can't get this to work on my Mac. I've tried everything! Someone please help!
I don't have a Mac, but you may want to post exactly what you did and what error problem occurred, specifically. We don't know if the import failed, creating the directory structured failed, etc...
Dominick Sela: Milford Charles Murray: I have windows 7 and cannot get it to accept the backward slash (\) any ideas? Do you mean you cannot create the Libronix DLS\SentenceDiagrams folder? I have Windows 7....are you sure you are using a \ and NOT a / slash? It makes a big difference... Do this to avoid using the \: 1. Bring up File Explorer. 2. In the right panel, right click and click on New. A little panel will appear to the right, click on Folder. It will show a folder with New Folder as name, all highlighted. Type Libronix DLS (with the space) and hit enter. 3. Now double click on that folder, to go to it. Should be empty. 4. Right click and click on New. A little panel will appear to the right, click on Folder. It will show a folder with New Folder as name, all highlighted. Type SentenceDiagrams (with NO space) and hit enter. Now you have the place to unzip the files to. If that fails, please post the specific error it gives you.
Peace and Joy to you, Dominick!
You are indeed very much appreciated!
If this problem is too time-consuming, I can still do it the “old way,” as I have formerly placed a number of Terry’s (His sentence diagramming is truly excellent!!!!) Sentence Diagrams into my L3 and scanned them to L4 on my old computer. The Logos sync puts them on my new computer. Smooth, eh?
You, Dominick, (God Bless You! *smile* ) have helped and been an enrichment to the lives of many brothers and sisters on these Logos Forums. I’m sure you also – like most of us, I guess – still feel the urgent “press of time”; so if you don’t wish to tackle this any further, I will most assuredly understand and continue to feel gratitude toward you and other “helpers” on the Forums.
I believe I have followed your instructions exactly. Also, I closed and restarted L4 several times.
Just now I realised I have not rebooted my computer, so after I post this, I will do that.
However, so far....
.... I still end up without the new sentence diagrams. You can see from the screen shots that I do have the “former” ones….
….. any further ideas?? Dominick? Or some other wise one? *smile*
Have rebooted computer.... new sentence diagrams still not there ...
has anyone other than Dominick been able to actually do this? Perhaps you, Dominick, are living under a Special Dispensation??!!?? (that's supposed to be humour!
*smile*
Peace to all!
I'm interested in it. Can you send me, thanks a lot!
nelsonyuen at gmail dot com
Try moving the "Libronix DLS" folder, including the "SentenceDiagram" subfolder from "Documents" to "My Documents" and use the Import All command in L4 once again. I did this and the diagrams imported fine.
In HIs grip