Page 1 of 1 (3 items)
This post has 2 Replies | 1 Follower

Posts 3
Jeremy Burks | Forum Activity | Posted: Mon, Oct 26 2015 12:27 PM
I'm using a Steinberg UR22 USB audio interface. I get Input audio levels in System Preferences/Sound but when the UR22 is selected within Proclaim the levels are not there. I've tested this with 10.11 and 10.10 with the same result. When using an Icicle USB interface The levels work fine. I know Steinberg has yet to fix issues with OS10.11 but 10.10 should be stable. Have you been able to test using various USB Pro audio interfaces and is this one on the list? also I am thinking about purchasing a "behringer X AIR XR16" mixer with USB output, Do you know if this device compatable? Jeremy B.
Posts 783
Jordan Sjodin | Forum Activity | Replied: Mon, Oct 26 2015 1:32 PM

That was not one of the devices that I have tested, but I may have a similar device I will go ahead and try with. With my testing, I was able to use USB audio devices just fine from within Proclaim. Do you know if there was any special software you had to install to get your Sternberg UR22 USB audio device to work within OS X? Pardon my lack of knowledge with this device.

For my setup at my church, I was using a line out on the soundboard, that I plugged into this USB dongle:

This worked great with good quality and no hiccups. 

As for the USB output on the Behringer mixer, I do not know if it would be directly compatible. However, considering it has a phones out, even if the USB interface did not work, you could go a similar route as I described above.

I hope that helped. Im going to try and look and see if the first issue you described is a Proclaim problem or a Steinberg problem.

- Jordan Sjodin

Mac | iOS | Android | Windows | Web Developer 

Posts 783
Jordan Sjodin | Forum Activity | Replied: Mon, Oct 26 2015 2:36 PM

I just tried a baby Behringer (behringer xenyx 302usb) with Proclaim and it worked. However, I did notice that OS X reported this device as not having audio controls, while Proclaim still presented the volume slider (attempting to use the slider did nothing). That's a bug that I'll need to fix.

This makes me more confident that the Behringer device you spoke of would work with Proclaim as well.

- Jordan

Mac | iOS | Android | Windows | Web Developer 

Page 1 of 1 (3 items) | RSS