Live Streaming with Proclaim?

http://support.proclaimonline.com/hc/en-us/articles/208384323-Can-I-show-live-video-while-I-present-

So I'm not sure about OBS, but if it supports capturing a desktop's output then you could use that to bring Proclaim into your live stream. If it supports chroma keys or Luma keys you can then key out colors from Proclaim. You can use transparent pngs in Proclaim as your backgrounds and then when you are OnAir you can tell proclaim to fill the transparent part with green or blue for keying purposes.

This article shows some of this with dedicated hardware, but is possible with software. I have done this using Wirecast.

Douglas Tervo

I know this is an older post but I found myself adding the same thing. Screen capture didn't work because I was using 2 different computers. What I found to be the solution was to add the ndi plugin to OBS (link below) and add the presentation as an ndi source. The streaming computer then grabbed this as an ndi source and overlayed it on the stream.

https://obsproject.com/forum/resources/obs-ndi-newtek-ndi™-integration-into-obs-studio.528/

Luke Grimes

https://community.logos.com/discussion/comment/952590#Comment_952590

Hi Doug,

Does this option still work for you? Just trying to find a way to livestream my church's presentation without paying a bunch of money for a video switcher.

Thanks.

Justin (Faithlife)

https://community.logos.com/discussion/comment/968026#Comment_968026

Luke,

Are you trying to just live stream your presentation, or overlay video on a live feed as well? The latter is a little more tricky, but basic live streaming is free and simple. You won't need a video switcher. OBS should be able to capture two feeds as well.

Luke Grimes

https://community.logos.com/discussion/comment/968536#Comment_968536

Hi Justin,

Thanks for replying, I would like to overlay the proclaim slides on the live feed. I think I’m going to give OBS a try as someone else mentioned that. I just need to get the right cables to hook up a camera. It’s too bad that a Mevo camera won’t work with OBS.

Justin (Faithlife)

https://community.logos.com/discussion/comment/968541#Comment_968541

So with OBS you can capture both the live feed and the presentation slides, and sort of live stream them together. The video switcher is more so essential if you wanted to say overlay song lyrics from Proclaim over a live feed.

https://community.logos.com/discussion/comment/968551#Comment_968551

The video switcher is more so essential if you wanted to say overlay song lyrics from Proclaim over a live feed.

You can still do this within OBS by using a Chroma key filter

SGT-CofS

https://community.logos.com/discussion/comment/968556#Comment_968556

Is there any way that one could send hot keys to OBS from within Proclaim. I have been looking to find a way of doing this using the lighting midi feature but so far, i haven't been able to find a midi app (mac) that will let me run OBS in the background but still have it receive hotkey commands.

The goal being to add cue's to sections of the service that start / stop / transition OBS without the operator having to switch applications and manually change OBS during the service.

Would love to hear your thoughts and suggestions.

Justin (Faithlife)

https://community.logos.com/discussion/comment/969426#Comment_969426

Hello Iain,

I don't know if that's possible unfortunately. I tried to configure this http://charlie-roberts.com/midiStroke/ , and align with a hotkey in OBS, but it just didn't work for me.

Vineeth Paul Tuluri

https://community.logos.com/discussion/comment/969836#Comment_969836

Just the topic I was looking for.

We currently use VMix and Chroma keying the desktop capture of the Confidence monitor can be a hit and a miss. Is there a way to setup a third output with a transparent background for the Livestream to overlay over the video? Below are some examples of the types of things we would like to do.

https://community.logos.com/discussion/comment/970283#Comment_970283

Not currently, but that sounds cool! I'll bring this suggestion to the rest of the team.

Do you guys currently live stream? My church does our worship lower-thirds plus camera on the screens and the live stream. So that way we use the same slide setup for both.

And then for service we use fullscreen slides in the sanctuary plus picture-in-picture online, again utilizing one slide layout.

Vineeth Paul Tuluri

https://community.logos.com/discussion/comment/970416#Comment_970416

Yes we do. We overlay the lyrics (not lower thirds) on top of the video and as you mentioned picture-in-picture for the message.

Since we are a small church we don't display the video to the congregation hence the need for a third output with a transparent background for the livestream.

This maybe a separate topic, but since we are a multilingual church we display both the English and regional text of the song and that can be hard to position in the lower thirds

Courage Usie

https://community.logos.com/discussion/comment/970283#Comment_970283

Hello Paul,

I use Vmix too. How did you customise the scripture reference in the second video. Do you have a template. Thanks

John Goodman

https://community.logos.com/discussion/comment/1022108#Comment_1022108

I'd love live streaming to come to proclaim... this would be particularly good for weddings etc where guests cannot travel.

Tiffany Jeffers

https://community.logos.com/discussion/comment/970283#Comment_970283

Super old, but can you provide a tutorial on this? It looks epic!

https://community.logos.com/discussion/comment/1023661#Comment_1023661

Well my son figured out how to live stream to YouTube without going through power point etc.
Open OBS Studio and capture display, (you will need two monitors).

When you go ON AIR, the second screen is captured full size to stream through OBS and you can use the key pad or your iPhone app to advance the slides.

We just tested this and it worked for us.

Just a thought,

https://community.logos.com/discussion/comment/1070233#Comment_1070233

Hey guys, I know this is an old thread but wanted to post an article I made regarding streaming with free tools which is essentially the process JB mentioned above

https://support.faithlife.com/hc/en-us/articles/360040523332-Use-Proclaim-and-OBS-to-Livestream-to-YouTube

Plus, Proclaim supports a Foreground Only slides output in addition to the regular slides, so it is pretty easy to setup a situation where your congregation sees the slides+background, while you use Foreground only to accomplish lower-thirds for worship. All controlled with the same Proclaim.

Lynden O. Williams

https://community.logos.com/discussion/comment/1091473#Comment_1091473

Jordan, in view of Covid19, is it possible to expand the reach of Proclaim to something like 20 -30 miles?

https://community.logos.com/discussion/comment/1091535#Comment_1091535

Do you mean with regard to following Presentations?

what Is it you want to accomplish?

Lynden O. Williams

https://community.logos.com/discussion/comment/1091540#Comment_1091540

Would like for individuals to pick up the signal from 10 mile radius

https://community.logos.com/discussion/comment/1091739#Comment_1091739

Gotcha, currently there is not a way to change that. However, most signals show up in a bulletin and you could share that from Faithlife with whom ever.

Additionally, you could go on air with Proclaim and configure a Sign Feed to show that presentation, which you could share the link to.

Lastly, you could use OBS and YouTube from my article above and stream video/audio and slides to the web!

If you want help with any specifics feel free to let me know

Simon Taylor

https://community.logos.com/discussion/comment/1091473#Comment_1091473

Hi Jordan!

Simon from the land Downunder.

Our church wants to live stream only the front of house Proclaim presentation (minus any songs) and the audio. Is that easy and free for us to do?

From the post, I read it would seem so. But just want to make sure.

https://community.logos.com/discussion/comment/1091756#Comment_1091756

Yup that sounds good! If you wanted songs included that is where you start needing to look at licenses

https://community.logos.com/discussion/comment/1091786#Comment_1091786

Hey Jordan I saw in older comments where you said it is possible to overlay lyrics from Proclaim using OBS. Is there an article that walks you through how to do that step by step? The most recent article you posted just puts a picture in picture of the Proclaim display, right?

If it helps, I will be doing this on a Mac and I’m leaning towards using Streamlabs OBS. Thanks in advance!

https://community.logos.com/discussion/comment/1092942#Comment_1092942

Closest I could find is this one: https://support.faithlife.com/hc/en-us/articles/360007375691-Can-I-Show-Live-Video-While-I-Present-

I should throw one together real fast. In the mean time, you essentially need to decide on Chroma (green or blue) or luma (black) key. And then inside OBS when you add in Proclaim’s feed instead of positioning it Picture in picture you would right click on it then add a filter, then add a chroma or luma key.

This will let you remove the color and make the slide see through! and the you can overlay it on your video

https://community.logos.com/discussion/comment/1092945#Comment_1092945

Looks like in OBS you Right click on the video source > Filters > Add > Effects Filter and the select Chroma or luma.

Within Proclaim’s Settings > Display you can set the output transparency color for black (luma) or green blue (chroma)

https://community.logos.com/discussion/comment/1092946#Comment_1092946

Very helpful. Thank you!

https://community.logos.com/discussion/comment/877047#Comment_877047

Hello. I know I am replying to an old post but it seems the most relevant in this conversation. Is there a plan for Proclaim to support NDI in future. This would really help in capturing the output without resorting to third party options. Also, a feature to send Lower Thirds without having to change what the congregation are seeing would be really cool.

Peter Belschwinder

https://community.logos.com/discussion/comment/1092946#Comment_1092946

Do you have any guide on how we can use this with Ecamm live? I want to be able to project what is on the confidence monitor, and I want to set up a scene that contains the actual slides. Any help would be much appreciated. Your software and Ecamm live would make a beautiful union.

Rolf Angelsen

https://community.logos.com/discussion/comment/1091473#Comment_1091473

We use the foreground option, but even with three screen we´re one short. In a more normal time we use one to present to the audience, one for the confidence screen and the last one to run the program. What I really would like is an option for a "virtual screen" to send to vMix. Having a physical screen tor the foreground only is juts a hassle.

Tim Blatch

https://community.logos.com/discussion/comment/1094630#Comment_1094630

I came on the forum to ask this exact question!!! Lets hope that there is an answer soon

Phil Chambers

https://community.logos.com/discussion/comment/970283#Comment_970283

My church would like to do the same. The in-person church attenders see a full screen slide while the live stream sees the lyrics in lower thirds while watching the worship band sing. How is this possible?

Peter Belschwinder

https://community.logos.com/discussion/comment/1109157#Comment_1109157

I do this now. A lot of monitors, cloud casting. I’m running a total of 5 monitors right now

Phil Chambers

https://community.logos.com/discussion/comment/1109158#Comment_1109158

Could you provide a guide of how you do it? We use a video switcher (BlackMagic ATM mini pro). We want to show a full screen slide for in-person attendance and lower thirds for the live stream. Thanks for your help.

https://community.logos.com/discussion/comment/1109159#Comment_1109159

Hi,

I got this from Faithlife themselves - don't know if it helps. We looked at it and it wouldn't exactly work for us with the ATEM Mini Pro - but I see it working if I use something like OBS or vMix.

https://support.faithlife.com/hc/en-us/articles/360041308212-Overlays-from-Proclaim-while-Live-Streaming

Phil Chambers

https://community.logos.com/discussion/comment/1109160#Comment_1109160

Thanks for the help. How are you using Proclaim with the ATEM Mini Pro? Right now we are using the picture-in-picture format with our live stream. But we aren't fully happy with it. We would rather use lower thirds for the live stream while keeping the full slide format for the other monitor display. But maybe it can't be done.

https://community.logos.com/discussion/comment/1109163#Comment_1109163

Currently, you would do it with one Slides output to your projectors and one output as Foreground only to your stream.

If you are using a switcher, I'd send both slides and foreground only to the switcher. Then you can position the text as lowerthirds using the fly key while your projector shows the regular slides. And then jump to slides if you need to show a video or fullscreen slide on the stream.

This would require you to format your slides such that you only have two or three lines so it looks ok as lower thirds.

https://community.logos.com/discussion/comment/1109163#Comment_1109163

We are doing it a bit differently from what Jordan has suggested but we will try that and see if it improves what we are doing. Currently, we are using two computers - one hooked up to the projector in the sanctuary - this one has the normal display settings we use.

The second is hooked up to the ATEM plus the confidence monitor and it runs a lower third template with a transparent background which we set to green using proclaim. We then use the Chroma key in the ATEM to remove the background and use it as the upstream key on the video we are shooting in the sanctuary.

The Display Setting for the ATEM is "Slides" and the setting for the second screen is "Confidence". The confidence monitor we use to display the lyrics and scriptures for those on the platform. We could have connected either computer to the confidence monitor but we just used the one for the live stream as it is the more powerful one. W|e are currently not showing any videos so this works for us, but I know the moment we want to do videos, it won't work - so that is something I am thinking of fixing.

However, I will investigate using the flying key as Jordan has proposed to see if we can switch back to one computer.

https://community.logos.com/discussion/comment/1109273#Comment_1109273

Proclaim 3.0 now has NDI support! Which can greatly simplify your setups! Give it a try and let us now what you think. It can be configured in Proclaim -> Settings -> Display, and there you can add a custom output

ReformedPilgrim

https://community.logos.com/discussion/comment/1111080#Comment_1111080

I can't raise anyone on chat support. Does Proclaim support an IP camera for the new Livestream feature? I can't get my camera feed into Proclaim. It does support NDI but no idea how to get that in.

David Thomas

https://community.logos.com/discussion/comment/1111110#Comment_1111110

I can't raise anyone on chat support.

Try this:

Brian Burkhart - Support@Faithlife.com
Faithlife - Technical Support Representative, Church Products
Phone: 888-634-2038
Our Church Product support team is available from 6am-6pm (Pacific Time), seven days a week!

https://community.logos.com/discussion/comment/1111080#Comment_1111080

I saw it last night and we are will be testing it in our service this weekend! Awesome stuff.

William Gabriel

https://community.logos.com/discussion/comment/1111080#Comment_1111080

Proclaim 3.0 now has NDI support! Which can greatly simplify your setups! Give it a try and let us now what you think. It can be configured in Proclaim -> Settings -> Display, and there you can add a custom output

exciting, thanks! going to try it this weekend

https://community.logos.com/discussion/comment/1111080#Comment_1111080

Any idea when live streaming features will be available for Mac?

https://community.logos.com/discussion/comment/1111894#Comment_1111894

2 months later and still no response. When will the new livestreaming features be available for Mac?

https://community.logos.com/discussion/comment/1123673#Comment_1123673

Sorry we never replied! The system we used to bring this beta feature to windows quickly, unfortunately, had a few show-stopping issues on the Mac side. Since there are many other more powerful solutions to stream, plus free ones like OBS, we have instead been focusing on making Proclaim work with these app.

NDI support in Proclaim will let you easily send slides to OBS and it sends true transparent video with no need to mess with chroma or luma keys.

And just to clarify, the only feature missing from make, is the live stream cues that are in beta on Windows. Other than that, live video input, NDI output, and virtual screen are available on both platforms.