BUG: Hovering mouse over words in CUV (with RVI) does not show under translations in Information win

Hi,

I posted the following in the Chinese Forum did not get a meaningful reply, so posting here, as there are more knowledgable Logos expert users here Smile

https://community.logos.com/forums/t/187260.aspx

The example given in the post is Genesis 1:1, Hovering over every word in this verse, NOTHING shows up under translation in the Information Window. Some random words do show up in the information Window, this is not restricted to Genesis, I tried NT too!

Question:

Is there something wrong with my settings?
Does this happen to Korean and Japanese RVI Bible? (would appreciate if someone with these resource(s) can validate if it works in these RVI Bible.
If it is a Bug, would appreciate Logos recognise it and fix it as soon as practical, thank you.

Find more posts tagged with

Desktop App

Comments

MJ. Smith

What do you get when you turn on the RVI interlinear or pane? That's a quick way to see if the problem is lack of appropriate data or a problem in the display.

LimJK

https://community.logos.com/discussion/comment/1083446#Comment_1083446

What do you get when you turn on the RVI interlinear or pane? That's a quick way to see if the problem is lack of appropriate data or a problem in the display.

MJ, Thanks for your suggestion [:)] it provides further insight to the BUG:

The Bug I described goes away only when I turn ON - "Inline Reversed Interlinear" as shown in screenshot below
However, Turning ON - "Reverse Interlinear Pane" only, does not help

Hopefully, someone in Logos can look at this, thank you.

MJ. Smith

https://community.logos.com/discussion/comment/1083508#Comment_1083508

Interesting - yes I think FL has to figure this one out.

LimJK

https://community.logos.com/discussion/comment/1083528#Comment_1083528

Interesting - yes I think FL has to figure this one out.

MJ, Thanks.

I discovered another type of bug, even with the Inline Reverse Interline turned ON, eg. Job 24:1 ... "the Almighty" / "全能者"

When I hover mouse over ESV it is OK as per screenshot[:)] ... where "the Almighty" is selected, information appeared
When I hover mouse over Chinese Union Version, no show[:(] ... ie. "全能者" is not selected, nothing in information window.

PS: I am only discovering these type of very basic problem only when I start making myself to read CUV for my daily reading plan for 2020[;)]

Philip Peng

https://community.logos.com/discussion/comment/1083625#Comment_1083625

Interesting - yes I think FL has to figure this one out.

MJ, Thanks.

I discovered another type of bug, even with the Inline Reverse Interline turned ON, eg. Job 24:1 ... "the Almighty" / "全能者"

When I hover mouse over ESV it is OK as per screenshot ... where "the Almighty" is selected, information appeared

When I hover mouse over Chinese Union Version, no show ... ie. "全能者" is not selected, nothing in information window.

PS: I am only discovering these type of very basic problem only when I start making myself to read CUV for my daily reading plan for 2020

Hi, LimJK,

Thank you for posting this issue. I tested it on the Mac computer, hover over the "全能者" and found out that it is displaying correctly with the information. Please see my attached screenshot.

What I did was that I went to "Tools" and open " Information 資訊" first then I opened the CUV RVI with panel opened. I then hover the mouse on 全能者 and it display the information. I tried with other Chinese verses/words, they all display correctly. I tried in with both Chinese UI and English UI. Could you try it again to see if it works? Thank you.

LimJK

https://community.logos.com/discussion/comment/1083679#Comment_1083679

Hi, LimJK,

Thank you for posting this issue. I tested it on the Mac computer, hover over the "全能者" and found out that it is displaying correctly with the information. Please see my attached screenshot.

What I did was that I went to "Tools" and open " Information 資訊" first then hover the mouse on 全能者 and it display the information. I tried with other Chinese verses/words, they all display it correctly. I tried in with both Chinese UI and English UI. Could you try it again to see if it works? Thank you.

Philip,

What you have shown is the work around in my reply to MJ who suggested that I turn on Inline RVI and Pane. Can you try turning off "Inline Reverse Interlinear" and hover your mouse over every word of Genesis 1:1 see if you get "Translation" in "Information Window" to show up again.
May I know what version of CUV Resource you are using? so that we can compare, mine is as follows:

LLS:ZH-CUNPTRD 
2019-09-23T14:51:25
Z ZH-CUNPTRD.logos4 
RVI:ZH-CUNPTRD-NT 
2019-09-23T14:46:04
Z ZH-CUNPTRD-NT.lbsrvi 
RVI:ZH-CUNPTRD-OT 
2019-09-23T14:46:04
Z ZH-CUNPTRD-OT.lbsrvi

Thanks

Philip Peng

https://community.logos.com/discussion/comment/1083687#Comment_1083687

Hi, LimJK,

Thank you for posting this issue. I tested it on the Mac computer, hover over the "全能者" and found out that it is displaying correctly with the information. Please see my attached screenshot.

What I did was that I went to "Tools" and open " Information 資訊" first then hover the mouse on 全能者 and it display the information. I tried with other Chinese verses/words, they all display it correctly. I tried in with both Chinese UI and English UI. Could you try it again to see if it works? Thank you.

Philip,

What you have shown is the work around in my reply to MJ who suggested that I turn on Inline RVI and Pane. Can you try turning off "Inline Reverse Interlinear" and hover your mouse over every word of Genesis 1:1 see if you get "Translation" in "Information Window" to show up again.

May I know what version of CUV Resource you are using? so that we can compare, mine is as follows:

LLS:ZH-CUNPTRD 

2019-09-23T14:51:25

Z ZH-CUNPTRD.logos4 

RVI:ZH-CUNPTRD-NT 

2019-09-23T14:46:04

Z ZH-CUNPTRD-NT.lbsrvi 

RVI:ZH-CUNPTRD-OT 

2019-09-23T14:46:04

Z ZH-CUNPTRD-OT.lbsrvi

Thanks

Hi, LimJK,

I turned off the Inline RVI and Pane and tested it again. When I hovered over "創造"(actually on 創）or highlighted both 創造, either way the information displayed correctly. Please see my attached screenshot.

My CUV versions are:

LLS:ZH-CUNPTRD
2019-09-23T14:51:25Z
ZH-CUNPTRD.logos4

RVI:ZH-CUNPTRD-NT
2019-09-23T14:46:04Z
ZH-CUNPTRD-NT.lbsrvi

RVI:ZH-CUNPTRD-OT
2019-09-23T14:46:04Z
ZH-CUNPTRD-OT.lbsrvi

Thanks.

MJ. Smith

https://community.logos.com/discussion/comment/1083689#Comment_1083689

Would you then suspect a corrupt index and the delete/add routine on the resource?

Andrew Batishko

https://community.logos.com/discussion/comment/1083738#Comment_1083738

Deleting/adding a resource is not likely to cause a reindex since the resource version will not have changed. The correct way to do that is using the "reindex <resource name>" command in the Go box.

That said, I don't think this is at all related to a corrupt index, since the index is used for searching, and this is not doing a search.

In my testing, hovering on the first character in the word worked correctly, while other characters in the word did not work. Does this match what others are experiencing?

Philip Peng

https://community.logos.com/discussion/comment/1083747#Comment_1083747

Deleting/adding a resource is not likely to cause a reindex since the resource version will not have changed. The correct way to do that is using the "reindex <resource name>" command in the Go box.

That said, I don't think this is at all related to a corrupt index, since the index is used for searching, and this is not doing a search.

In my testing, hovering on the first character in the word worked correctly, while other characters in the word did not work. Does this match what others are experiencing?

Hi, Andrew,

Yes, you are correct. One term in English (ex. Jesus) might need two or three Chinese characters (Jesus: 耶穌) to indicate it. The best practice is to highlight both Chinese characters. If only hovers over the 耶穌, only the first character 耶 of the word/term will work correctly to have the definition/information for 耶穌. However, when user turns on Inline RVI and Pane, user can see that these two characters 耶穌 are linked together. For the nature of Chinese, it is hard/impossible to function like English.

Best regards,

Philip

LimJK

https://community.logos.com/discussion/comment/1083689#Comment_1083689

Hi, LimJK,

I turned off the Inline RVI and Pane and tested it again. When I hovered over "創造"(actually on 創）or highlighted both 創造, either way the information displayed correctly. Please see my attached screenshot.

My CUV versions are:

LLS:ZH-CUNPTRD
2019-09-23T14:51:25Z
ZH-CUNPTRD.logos4

RVI:ZH-CUNPTRD-NT
2019-09-23T14:46:04Z
ZH-CUNPTRD-NT.lbsrvi

RVI:ZH-CUNPTRD-OT
2019-09-23T14:46:04Z
ZH-CUNPTRD-OT.lbsrvi

Thanks.

Looks like we have the same version of CUV with RVI. By the way, where is your screenshot with RVI turn off? [:)]

For my case, when I hover the mouse over every word in Gen 1:1 there is no "translation" data in the Information Window. If I turn on "Inline RVI" hovering over the same words in Gen 1:1 works. What else can I try/do or to capture logs so that you can investigate.

Philip Peng

https://community.logos.com/discussion/comment/1083755#Comment_1083755

Hi, LimJK,

I turned off the Inline RVI and Pane and tested it again. When I hovered over "創造"(actually on 創）or highlighted both 創造, either way the information displayed correctly. Please see my attached screenshot.

My CUV versions are:

LLS:ZH-CUNPTRD
2019-09-23T14:51:25Z
ZH-CUNPTRD.logos4

RVI:ZH-CUNPTRD-NT
2019-09-23T14:46:04Z
ZH-CUNPTRD-NT.lbsrvi

RVI:ZH-CUNPTRD-OT
2019-09-23T14:46:04Z
ZH-CUNPTRD-OT.lbsrvi

Thanks.

Looks like we have the same version of CUV with RVI. By the way, where is your screenshot with RVI turn off?

For my case, when I hover the mouse over every word in Gen 1:1 there is no "translation" data in the Information Window. If I turn on "Inline RVI" hovering over the same words in Gen 1:1 works. What else can I try/do or to capture logs so that you can investigate.

Hi, LimJK,

Yes, we have the same version of CUV with RVI. Attached are my screenshots with RVI turn off.

In the information section, could you make sure "Update on" is set to "Hover". Also, make sure your Logos version is update-to-date. Could you try to open the "Information" before you open your "CUV RVI Bible"? Please try these suggestions and let me know if it works. Thank you.

LimJK

https://community.logos.com/discussion/comment/1083747#Comment_1083747

In my testing, hovering on the first character in the word worked correctly, while other characters in the word did not work. Does this match what others are experiencing?

Andrew,

Thanks for reply ... I noticed there are different behaviours if we use different verse. Can I confirm that you are using Gen 1:1 hovering the mouse over word by word.

I noticed in the

working situations (When I turn on Inline RVI): when I hover the mouse over a word, the related group of Chinese words will be highlighted, these group of words can be sequential or non-sequential, they correspond to the underlining original language word (like in English RVI)
not working situations (When I turn off Inline RVI): when I hover the mouse over a word, nothing gets highlighted, and nothing appears in the Information Windows. When I hover the mouse over each of the word, I noticed sometimes under translation in the Information windows I get a momentary .... (work in process indicator) then it stops and nothing gets displayed

Are there some special resources, datasets that I am missing? I bought the very first version of Chinese Bronze, other than that I only purchase various English Logos Base Packages + Commentary Sets over the last 15 years.

Are there some settings I need to tweak to work with Chinese RVI ... I recalled may years ago someone mentioned that there is some uniqueness of deal with Chinese Character (Word) ... not sure now.

Hope that a few more Logos User who own the CUV with RVI, can validate if it is a general problem or it is just me [:(]

Andrew Batishko

https://community.logos.com/discussion/comment/1083769#Comment_1083769

not working situations (When I turn off Inline RVI): when I hover the mouse over a word, nothing gets highlighted, and nothing appears in the Information Windows. When I hover the mouse over each of the word, I noticed sometimes under translation in the Information windows I get a momentary .... (work in process indicator) then it stops and nothing gets displayed

My experience is that it works correctly if you hover your mouse over the first character in the word, but not at all over other characters.

I suspect you would see this same behavior if you left your mouse over the first character for long enough.

You might find it easier to use if you change from hover to click. Then you can click on the first character in order to have it work.

LimJK

https://community.logos.com/discussion/comment/1083758#Comment_1083758

Hi, LimJK,

Yes, we have the same version of CUV with RVI. Attached are my screenshots with RVI turn off.

In the information section, could you make sure "Update on" is set to "Hover". Also, make sure your Logos version is update-to-date. Could you try to open the "Information" before you open your "CUV RVI Bible"? Please try these suggestions and let me know if it works. Thank you.

Philip, Thanks for reply ... Yes I always have "Update on" set to "Hover" in information window the first day I use Logos many years ago [:)] as it works that way for all other non-Chinese RVI.

I also tried what you have suggested as follows:

Open Logos with blank Layout
Open "Information Window"
Open Chinese CUV with Interlinear to Genesis 1:1
Hover the mouse word by word from left to right of Genesis 1:1

I noticed that when I hover over the first word for the first time I get this in-progress indicator for a short while (with fast fingers to that this screen shot) ... then disappear.

LimJK

https://community.logos.com/discussion/comment/1083771#Comment_1083771

My experience is that it works correctly if you hover your mouse over the first character in the word, but not at all over other characters.

I suspect you would see this same behavior if you left your mouse over the first character for long enough.

You might find it easier to use if you change from hover to click. Then you can click on the first character in order to have it work.

Andrew, Thanks

I have change from hover to click ... for my case it is the same ...

May I know are you running Logos on Mac on Windows, my environment is in my signature.
would it be useful if you install a copy of my Logos License on one of your test machine (I can send you my password offline)
Unfortunately I do not have a Windows environment to try ... to see if it is my Mac environment ... I do not have anything fancy on my Mac.

Philip Peng

https://community.logos.com/discussion/comment/1083774#Comment_1083774

Hi, LimJK,

Yes, we have the same version of CUV with RVI. Attached are my screenshots with RVI turn off.

In the information section, could you make sure "Update on" is set to "Hover". Also, make sure your Logos version is update-to-date. Could you try to open the "Information" before you open your "CUV RVI Bible"? Please try these suggestions and let me know if it works. Thank you.

Philip, Thanks for reply ... Yes I always have "Update on" set to "Hover" in information window the first day I use Logos many years ago Smile as it works that way for all other non-Chinese RVI.

I also tried what you have suggested as follows:

Open Logos with blank Layout
Open "Information Window"
Open Chinese CUV with Interlinear to Genesis 1:1
Hover the mouse word by word from left to right of Genesis 1:1

I noticed that when I hover over the first word for the first time I get this in-progress indicator for a short while (with fast fingers to that this screen shot) ... then disappear.

Hi, LimJK,

I don't see the behavior you described here. Please email me at: Chinese@faithlife.com and I can schedule a conference call with you to access your computer to investigate further. Thank you.

Best regards,

Philip

LimJK

https://community.logos.com/discussion/comment/1083843#Comment_1083843

Philip,

Thanks ... I will email you my available timeslots, we have time difference of 16 hrs. Thanks.

LimJK

https://community.logos.com/discussion/comment/1083901#Comment_1083901

Philip,

I have setup my copy of Logos 8 on a Windows 10 environment ... found that the issue I reported on mac is not happening here.

Both Andrew and yourself on your copy of Logos 8 on macOS do that have my issue. So, I am going to assume that something on my MacBookPro is wrong. I have been using Apple Migration Assistant for many years when upgrading macOS.

I have decided that it is time for me to spend sometime to re-install my macOS Catalina from scratch on my MacBookPro. This time I am NOT going to use the Apple migration assistant, instead, I am going to install from scratch all my Applications (Apple Apps, Microsoft Office 365) including Logos 8.

I will test the same scenario in the new setup and report back. Thanks.

Philip Peng

https://community.logos.com/discussion/comment/1084142#Comment_1084142

Philip,

I have setup my copy of Logos 8 on a Windows 10 environment ... found that the issue I reported on mac is not happening here.

Both Andrew and yourself on your copy of Logos 8 on macOS do that have my issue. So, I am going to assume that something on my MacBookPro is wrong. I have been using Apple Migration Assistant for many years when upgrading macOS.

I have decided that it is time for me to spend sometime to re-install my macOS Catalina from scratch on my MacBookPro. This time I am NOT going to use the Apple migration assistant, instead, I am going to install from scratch all my Applications (Apple Apps, Microsoft Office 365) including Logos 8.

I will test the same scenario in the new setup and report back. Thanks.

Hi, LimJK,

Sure, no problem. Thank you.

LimJK

https://community.logos.com/discussion/comment/1084142#Comment_1084142

Philip, Andrew, MJ,

Thanks ... the problem I had just disappeared [:)] ... I really do not know what has happened? I think there are 2 possibilities:

I just downloaded and updated to Logos Bible Software 8.10 SR-2 8.10.0.0034 this morning. However, from the Release note, it seems to be unrelated.
I went to the visual filter in CUV, turn OFF / ON Corresponding word ... it is working now [:)]

Philip Peng

https://community.logos.com/discussion/comment/1084352#Comment_1084352

Philip, Andrew, MJ,

Thanks ... the problem I had just disappeared ... I really do not know what has happened? I think there are 2 possibilities:

I just downloaded and updated to Logos Bible Software 8.10 SR-2 8.10.0.0034 this morning. However, from the Release note, it seems to be unrelated.

I went to the visual filter in CUV, turn OFF / ON Corresponding word ... it is working now

Hi, LimJK,

You are welcome and thank you for the updates and I am glad that it is working for you now.

Best regards,

Philip