Can't open Logos 27.2
I am running on a fully updated Windows 11 Pro system (22H2). Yesterday, Logos 27.2 worked. Today, it does not. It starts to open and then crashes. I tried repairing the installation, but that did not help.
I get two errors in Event Viewer:
Application: Logos.exe
CoreCLR Version: 7.0.923.32018
.NET Version: 7.0.9
Description: The process was terminated due to an internal error in the .NET Runtime at IP 0x00007FFFDBB76A3A (0x00007FFFDBAB0000) with exit code 0x80131506.
Faulting application name: Logos.exe, version: 27.2.0.21, time stamp: 0x6492041a
Faulting module name: coreclr.dll, version: 7.0.923.32018, time stamp: 0x6491fc88
Exception code: 0xc0000005
Fault offset: 0x00000000000c6a3a
Faulting process id: 0x0x38AC
Faulting application start time: 0x0x1D9CB49EC66C337
Faulting application path: C:\Users\darre\AppData\Local\Logos\System\Logos.exe
Faulting module path: C:\Users\darre\AppData\Local\Logos\System\coreclr.dll
Report Id: d01822a4-c34c-4f8f-b584-64775dfb2bde
Faulting package full name:
Faulting package-relative application ID:
Comments
-
-
Yes, that worked. But after rebuilding my layout, the application still would not open normally. A repair installation did not work. So, I uninstalled, reinstalled, downloaded 7.4 GB of resources, and reindexed. Now, it is working again. But I don't understand what caused the corruption in the first place.
Update: I rebooted, and Logos will no longer open from a recent layout. But if I change the Program Settings to open with a blank layout or with Home, it opens OK. It is only when it tries to open a recent layout that it crashes. The error log files are attached.
0 -
Update: I rebooted, and Logos will no longer open from a recent layout.
It seems to be connected with LLS:NRSVUE:
2023-08-10 00:24:55.9993 INFO 37 NotesToolUserVisualFilterProvider | Got 0 notes markups for LLS:NRSVUE 0:2147483647. (407ms)
2023-08-10 00:24:56.5350 ERROR 37 LogosDesktopApiClient | FindReverseInterlinearProductAsync
ServiceException: No RVI product found (NotFound)So try opening NRSVUE in a blank layout (with other RI's) and rebuild the layout if that works.
Dave
===Windows 11 & Android 13
0 -
If I start Logos while holding down the Ctrl key, Logos opens just fine and I can manually load the default layout that I have saved. If I try to automatically open the default layout on start-up, Logos crashes.
I have done a complete fresh reinstall of Logos (it took hours). It worked OK for two days and then the problem started again. I have done a quick fix, where I save the Data, Documents, and User folders, reinstall the system files, then restore the saved folders. This too solves the problem for a couple of days. Then the problem recurs.
The error regarding NRSVUE makes sense, since Logos has not issued a reverse interlinear yet. But I had the exact same layout with version 26 of Logos, and it caused no problem.
So at this point, I am stuck with starting with a blank layout until Logos comes up with a solution. I hope it is soon!
Thanks to everyone who has helped!
0 -
So at this point, I am stuck with starting with a blank layout until Logos comes up with a solution. I hope it is soon!
Same here, Darren.
Under Program Settings, I've set: At Startup Open To: Blank Layout.
It loads a blank layout. I can then load the layout I want.
As you say, that's a workaround, not really a solution.I was also experiencing this problem on the previous version of Logos (27.1).
Details in this thread: https://community.logos.com/forums/p/217602/1267664.aspx#1267664
0 -
The error regarding NRSVUE makes sense, since Logos has not issued a reverse interlinear yet. But I had the exact same layout with version 26 of Logos, and it caused no problem.
RI's do exist for NRSVUE if you have L10 Silver Features or higher (or a subscription). Do you see the Interlinear icon when it is loaded from a blank layout?
Dave
===Windows 11 & Android 13
0
