Guides and Reports
I do I find all the reports generated from my guides and then selectively edit/delete as required.?
Comments
-
Larry, let me ask a question for understanding. Are you trying to locate what you've previously produced in using a guide (say a Passage Guide on John 3) or are you trying to find where all the parts of a guide can be found so you can add or delete sections?
If the first, then the answer is no where since the results of running a guide are not archived anywhere. You have to rerun the guide.
If the second, open a guide then go to the large guide icon in the upper left hand corner of the pane and on the drop down menu select Edit Guide Template.
If I have missed your question please re-post. More info on guide can be found on the wiki: http://wiki.logos.com/Guides__
Pastor, North Park Baptist Church
Bridgeport, CT USA
0 -
You can view all your saved guides through a work-around. This may help you achieve what you are looking for.
1) Create a blank guide with no sections in it. This is important because if you do the following some sections in the guide it will most likely lock up Logos.
2) run the guide setting the reference to "gen-rev" this will create a guide for the entire Bible.
3) Add the "my content" section to the guide. all of your saved guides will now be generated.
4) to fully delete a guide, open it, open the panel menu, and then select delete this guide from the menu.
Hope this helps!
0 -
Halo,
Thanks for the answer. It looks like there needs to be some improvements in this area of Logos, but at least I have a workaround -Yikes 1
0 -
Larry Good said:
Halo,
Thanks for the answer. It looks like there needs to be some improvements in this area of Logos, but at least I have a workaround -Yikes 1
No problem. When L4 first came out there was no real way to delete saved guides! Fortunately someone along the way came up with this.
0 -
Halo Hound said:
When L4 first came out there was no real way to delete saved guides! Fortunately someone along the way came up with this.
Not ideal, but it does work. In L4 Mac, I needed to restart the app a couple of times.
0
