Bug: CMD+F Search in Chinese Bible

LimJK
LimJK Member Posts: 1,068 ✭✭
in Chinese Forum

Hi Logos,

I encountered this for a while, just unable to capture a repeatable case. Decided to spend some time this morning to catch this bug. I am running Logos for Mac 7.3.0.0041.

I am using “誇大” as an example for TCUV (the one with RVI - ZH-CUNPTRD) ... I can repeat the same problem with "夸大" in CUV (Simplified text - ZH-CUNPSMP), the following are steps that I have repeated a few times:

  1. Open TCUV and start from Gen 1:1
  2. CMD+F on the TCUV Panel and enter the Chinese words “誇大”
  3. Click on the Down arrow to do a Forward Search ... 17 times to go to the last verse in Revelation.
  4. Now Click on the Up arrow to do Previous Search ... you will be able to move to Jude 16
  5. It will get stuck there [:(]
  6. I give it a bit of help by going to the next “誇大” in Daniel 7:25
  7. Clicking Up arrow ... this time it skipped 2 verses and end up with “誇大” in Daniel 7:8
  8. After that I get more skips
  9. I also noticed that some times the Bible Reference in the Reference Box did not change to reflect the correct verse
  10. Hope you can catch this bug

Blessed Christmas and Happy New Year!

PS: I remember Bradley instructions the last time ... so, I have reindexed both these Bible.

JK

MacBookPro Retina 15" Late 2013 2.6GHz RAM:16GB SSD:500GB macOS Sierra 10.12.3 | iPhone 7 Plus iOS 10.2.1

Comments

  • Bradley Grainger (Logos)
    Bradley Grainger (Logos) Administrator, Logos Employee Posts: 11,969

    LimJK said:

    PS: I remember Bradley instructions the last time ... so, I have reindexed both these Bible.

    Reindexing has nothing to do with this problem. Please don't run that command unless you're explicitly instructed to by a Faithlife developer (otherwise, it's probably just wasting your time).

  • LimJK
    LimJK Member Posts: 1,068 ✭✭
    https://community.logos.com/discussion/comment/873233#Comment_873233

    Bradley Grainger (Faithlife) said:

    Reindexing has nothing to do with this problem. Please don't run that command unless you're explicitly instructed to by a Faithlife developer (otherwise, it's probably just wasting your time).

    Oops ... noted, I shall not run re-indexing again by myself.

    JK

    MacBookPro Retina 15" Late 2013 2.6GHz RAM:16GB SSD:500GB macOS Sierra 10.12.3 | iPhone 7 Plus iOS 10.2.1

  • LimJK
    LimJK Member Posts: 1,068 ✭✭
    https://community.logos.com/discussion/comment/873233#Comment_873233

    Bradley,

    So, is this a bug for these 2 Chinese Bible? Don't seem to have this problem with the 2 new Logos Public Domain Chinese Bible or other English Bibles that I am using. Just want to check that it is not a problem only on my machine. Thanks.

    JK

    MacBookPro Retina 15" Late 2013 2.6GHz RAM:16GB SSD:500GB macOS Sierra 10.12.3 | iPhone 7 Plus iOS 10.2.1

  • Bradley Grainger (Logos)
    Bradley Grainger (Logos) Administrator, Logos Employee Posts: 11,969

    LimJK said:

    • Now Click on the Up arrow to do Previous Search ... you will be able to move to Jude 16
    • It will get stuck there Sad
    • I give it a bit of help by going to the next “誇大” in Daniel 7:25
    • Clicking Up arrow ... this time it skipped 2 verses and end up with “誇大” in Daniel 7:8

    I can reproduce these problems and have filed a case.

  • LimJK
    LimJK Member Posts: 1,068 ✭✭
    https://community.logos.com/discussion/comment/873365#Comment_873365

    Bradley Grainger (Faithlife) said:

    I can reproduce these problems and have filed a case.

    Bradley,

    Thanks[:)]

    JK

    MacBookPro Retina 15" Late 2013 2.6GHz RAM:16GB SSD:500GB macOS Sierra 10.12.3 | iPhone 7 Plus iOS 10.2.1

  • Philana R. Crouch
    Philana R. Crouch Member, Logos Employee Posts: 4,597

    LimJK said:

    Hi Logos,

    I encountered this for a while, just unable to capture a repeatable case. Decided to spend some time this morning to catch this bug. I am running Logos for Mac 7.3.0.0041.

    I am using “誇大” as an example for TCUV (the one with RVI - ZH-CUNPTRD) ... I can repeat the same problem with "夸大" in CUV (Simplified text - ZH-CUNPSMP), the following are steps that I have repeated a few times:

    1. Open TCUV and start from Gen 1:1
    2. CMD+F on the TCUV Panel and enter the Chinese words “誇大”
    3. Click on the Down arrow to do a Forward Search ... 17 times to go to the last verse in Revelation.
    4. Now Click on the Up arrow to do Previous Search ... you will be able to move to Jude 16
    5. It will get stuck there Sad
    6. I give it a bit of help by going to the next “誇大” in Daniel 7:25
    7. Clicking Up arrow ... this time it skipped 2 verses and end up with “誇大” in Daniel 7:8
    8. After that I get more skips
    9. I also noticed that some times the Bible Reference in the Reference Box did not change to reflect the correct verse
    10. Hope you can catch this bug

    This is fixed in 7.5 (7.5.0.0031).

    How to Enable and Submit Log Files

  • LimJK
    LimJK Member Posts: 265 ✭✭
    https://community.logos.com/discussion/comment/891452#Comment_891452

    Philana,

    Thanks ... I can confirm that it is fixed [:)]

    JK

    MacBookPro 14" (2021) RAM:16GB SSD:1TB macOS Sequoia 15.2 | iPhone Xs Max iOS 18.2 | Logos Pro 38.1.002

Categories