Index of Bible Studies

245678

Comments

  • Member Posts: 5,004 ✭✭✭

    Peace, Richard!                     *smile*                                        I am absolutely overwhelmed!            *smile*

                        A whole new dimension of using Logos has opened for me!                       I actually have 1196 .docx pages in my index -- and it works so perfectly!               *smile*

                                             I sincerely hope others can find the "deep blessings" in your "sharing" that I have found!                Again, I must say, my gratitude to you is "unbounded"!

                      We are all "busy," however, I am hoping that you might find time to answer a few carefully-written questions as time rolls on, please!

    Kindest personal greetings; and God Bless You and Your Loved Ones in 2014 and Forever!                  *smile*

    Philippians 4:  4 Rejoice in the Lord always; again I will say, Rejoice. 5 Let your reasonableness be known to everyone. The Lord is at hand..........

  • Member Posts: 194 ✭✭✭

    I have created a new version of the Index of Bible Studies. This includes the Spurgeon, Piper and Keller sermon archives (thanks to Mark Barnes), as well as a number of other new books. So there are now over 30,000 Bible studies and sermons listed. These are Bible studies that would not usually turn up in your Passage Guide, because they are not of the Bible Commentary type.

    If you want the want the whole list, download the Index Bible Studies.docx file. If instead you only want a list of the Bible Studies that are in the books that you personally own (and you have a Windows computer), download the MyIndex.zip, unzip the two files in some directory, and run the Index Bible Studies.exe program. After about a minute, a file called My Index Bible Studies.rtf will be created in your Documents directory. Open it in Word or a similar program, and save it as a DOCX file.

    In both cases, you can then create a Personal Book in Logos using the DOCX file. Make sure you set the type as Bible Commentary (not just Commentary). Earlier on in this thread you will find an image you can use for the cover if you want to.

    4276.Index Bible Studies.docx

    0172.MyIndex.zip

  • Member Posts: 1,440 ✭✭✭

    Hey Richard thanks for continually updating this! I'm currently in the process of adding your list to Bible notes so that I can access it from my iPad! 

  • Member Posts: 2,662 ✭✭✭

    This continues to be an amazing resource.  Thanks for the update.

  • Member Posts: 639 ✭✭

    Thanks for all of the work. This is great!!! 

  • Member Posts: 4,796 ✭✭✭

    Mark Barnes made a sermon index and compilation of all of MacArthur's sermons; would be a worthy inclusion...

    L2 lvl4 (...) WORDsearch, all the way through L10,

  • Member Posts: 194 ✭✭✭

    Are you talking about this thread? The problem is that the sermons are in a Personal Book, and every time a PB gets compiled by a different user it gets a different id from Logos. (At least, I presume that is the case.) So it is not possible to create a link from my file to a Personal Book that works on other computers than mine, so I can not include those MacArthur sermons in my index.

  • Member Posts: 194 ✭✭✭

    A year and a half after my first version of this file, I have now created an index of the Bible studies in all the books in my library. More than 1,000 pages, with almost 40,000 Bible studies and sermons listed. Originally, the idea was to include only those resources that do not appear in the Passage Guide. However, since then Logos has implemented the Sermons section of the Passage Guide, so many of the sermons listed in this file will also appear in the Passage Guide, and more will as Logos indexes more of the sermons in their resources. Despite this, I have left those sermons in this document. Maybe in a future version, I will add an option to the program that creates a personal index to exclude the sermons already in the Passage Guide.

    If you want the want the whole list, download the Index Bible Studies.docx file. If instead you only want a list of the Bible Studies that are in the books that you personally own (and you have a Windows computer), download the MyIndex.zip file, unzip the two files in some directory, and run the Index Bible Studies.exe program. After about a minute, a file called My Index Bible Studies.rtf will be created in your Documents directory. Open it in Word or a similar program, and save it as a DOCX file.

    In both cases, you can then create a Personal Book in Logos using the DOCX file. Make sure you set the type as Bible Commentary (not just Commentary). Earlier on in this thread you will find an image you can use for the cover if you want to.

    5857.Index Bible Studies.docx

    1145.My Index.zip

  • Member Posts: 1,155 ✭✭

    Anthony, great job on the cover image. I'd like to use it. Could you fix it from your original file (if you still have it) to spell LOGOS with all upper-case letters instead of with the lower-case 's' at the end? Many people mistakenly spell it Logo's or a plural (LOGOs) but it's all one word, from the Greek word λόγος.

    Sorry Rosie... I had been away from the forums for quite a while and didn't see this till today. Looks like NB.Mick got the corrections made for you.  [:D][Y]

  • Member Posts: 4,796 ✭✭✭

    Slight problem here folks:



    If you look close you can see both the exe and the dll behind the app screen in the upper left corner. You can also see Logos running on the taskbar.

    L2 lvl4 (...) WORDsearch, all the way through L10,

  • Member Posts: 3,591 ✭✭✭

    Slight problem here folks:

    might be because the ComAPI might be named differently
    e.g.  noticed it is using Logos4Lib  and L5 has it's ComAPI named LogosCom.exe

    QLinks, Bibl2, LLR, Macros
    Dell Insp 17-5748, i5, 1.7 GHz, 8G RAM, win 8.1

  • Member Posts: 194 ✭✭✭

    Slight problem here folks:

    If you look close you can see both the exe and the dll behind the app screen in the upper left corner. You can also see Logos running on the taskbar.

    Are you running the most recent version of Logos? Sometime in the past few months Logos changed their program so that it requires version 4 of the .NET framework, which meant that what my program links to was changed, which would explain why it can't find what it is looking for.

  • Member Posts: 4,796 ✭✭✭

    L2 lvl4 (...) WORDsearch, all the way through L10,

  • Member Posts: 3,518 ✭✭✭

    Yet another rich discovery!  This Index creator is fantastic!  

  • Member Posts: 194 ✭✭✭

    I have updated the file with my index of Bible studies that I have on Logos, which includes the Logos 6 and denominational packages that I have, and various other resources. There are about 45000 references indexed now. There is also a new version of the program that creates a personalised index that includes only the resources that you (and I) own. For instructions on how to use these files, and in what ways they are useful, see the previous messages in this thread.

    3857.Index Bible Studies.docx

    6012.MyIndex.zip

  • MVP Posts: 11,161

    Using adventure and community to challenge young people to continually say "yes" to God

  • Member Posts: 195 ✭✭

    Are you running the most recent version of Logos? Sometime in the past few months Logos changed their program so that it requires version 4 of the .NET framework, which meant that what my program links to was changed, which would explain why it can't find what it is looking for.

    I seem to be having the same problem. I am up to date on my Logos version running windows. In the meantime I have compiled the larger index, but would prefer the other.

    Robert

  • Member Posts: 195 ✭✭

    I seem to be having the same problem. I am up to date on my Logos version running windows. In the meantime I have compiled the larger index, but would prefer the other.

    Robert

    Follow-up

    Retried running the indexer on my other computer (Win. 8.1) and was successful. I do not know why the problem on my desktop (Win. 7).

    Recompiled the file, and am now in business. Thanks.

  • Member Posts: 194 ✭✭✭

    Strange. Maybe the other computer has the correct version of .NET, and the desktop no. Although if they both run Logos, I don't think that should be the problem. Apart from that, I have no idea and am just happy that you got it to work!

  • Member Posts: 65 ✭✭

    Richard, What a gift this is. Installed beautifully. I so appreciate that you did it and made it available in such a easy to execute form!

  • Member Posts: 65 ✭✭

    How can I tag this tool so that it will come up when I search for commentaries on a specific passage. With book commentaries I insert something like [[@Bible:Ge]] at the beginning of the document and then the work is listed if I am looking for some passage in Genesis.  I would be satisfied if it came up anytime I searched for any passage and then I would use the TOC to find my target.  I do not have the ability to tag it for each individual passage. Any suggestions? 

    I am amazed at how many suggestions for additional study this brings to my attention. Quite valuable!

  • Member Posts: 194 ✭✭✭

    It used to do this, and show up in the passage guide, but at some point all the milestones like [[@Bible:Ge]] got lost. I don't know how, maybe when Word creashed once and I had to reconstruct the file, I forgot to put in those milestones. So you can put them in your copy in the meantime, and I will put them in my file as well, so that they will appear next them I publish an update to the file.

  • Member Posts: 65 ✭✭

    Well I am not complaining. I was amazed how many items it pointed out that I never would have thought to look at.

    I am curious. Is there a utility you use to put those milestones in or do you just do it manually? I see these huge commentary series people tag and wonder "how in the world"?

  • Member Posts: 194 ✭✭✭

    It would no doubt be possible to write a Word macro to do, but I will just do it manually. Probably take less time for me rather than working out how to write the macro.

  • Member Posts: 1,440 ✭✭✭

    Probably take less time for me rather than working out how to write the macro.

    Hey Richard, here's a helpful post from Robert Warren, on how to put the milestones into the macro. (It's toward the bottom of the page)

  • Member Posts: 194 ✭✭✭

    Another update to the file. There are a few new books in the index, but the main change is the addition of milestones (one for each chapter) to the file, both in the main DOCX file and in the personalised indexed of your books that you can create. This means that the book (My) Index Bible Studies will show up in the Passage Guide and other places in Logos. Just make sure you set the type to Bible Commentary when you make the personal book. Other instructions are in the previous messages of this thread.

    0508.Index Bible Studies.docx

    7457.MyIndex.zip

  • Member Posts: 2,662 ✭✭✭
  • MVP Posts: 16,214
  • Member Posts: 639 ✭✭

    Thank you Richard. The fruits of your work have already been a blessing to me. Happy Easter! 

  • MVP Posts: 11,161

    Another update to the file. There are a few new books in the index, but the main change is the addition of milestones (one for each chapter) to the file

    Wow, these improvements are great. Thank you!

    Using adventure and community to challenge young people to continually say "yes" to God

  • Member Posts: 65 ✭✭

    Yes, this is quite an impressive achievement. I really helps you utilize resources you would never think of . . . and even if you did think of them, this streamlines the process of finding the relevant portion. You are so kind to share it, Richard.

  • Member Posts: 2,662 ✭✭✭

    Still enjoying this stunningly useful program.  Thankful for Richard's work on this.

  • Member Posts: 148 ✭✭

    I have tried to run the application program to Index my Bible resources. I wanted a new copy since I upgraded to a larger library and to Logos 7.

    Getting "Unhandled Exceptions has occurred in your application" telling me that Logos is not running when it is actually up and running. Tried stopping and restarting Logos. Same exceptions and message saying Logos is not running.

    Has the program been run on any Logos 7 libraries yet?

    Lane

  • Member Posts: 194 ✭✭✭

    I have added quite a few other books to the file over the last 18 months (mostly those on sale), but will work on those I picked up with Logos 7 before I post a new version.

    It doesn't matter if there are Logos 7 libraries: once they are in Logos they are just books regardless of where they came from. What could make a difference is having the Logos 7 program running rather than Logos 6, if there were changes made in how Logos allows other programs to access its data. But I just tried on my computer with Logos 7, and my program ran without problems. Is there any extra information in the window about the Unhandled Exception? Often there is more data that helps to find the problem.

  • Member Posts: 2,662 ✭✭✭

    Has the program been run on any Logos 7 libraries yet?

    I have L7 Platinum and re ran the program and it worked fine for me, adding about 30 more pages of links to what I originally had in L6.  My file turns out to be over 500 pages.   It is a stunningly useful program for me.

  • Member Posts: 148 ✭✭
  • Member Posts: 2,662 ✭✭✭
  • Member Posts: 2,662 ✭✭✭

    Lane, I am not good at resolving these things, but if you upload the log files, someone may be able to figure out what is going on.

  • Member Posts: 1,408 ✭✭✭

    I have added quite a few other books to the file over the last 18 months (mostly those on sale), but will work on those I picked up with Logos 7 before I post a new version.

    I had intended to ask about this months ago and forgot. IIRC this only shows resources that you have and what we have in common with you, isn't that correct? 

    Logos 10  | Dell Inspiron 7373 | Windows 11 Pro 64, i7, 16GB, SSD | iPhone 13 Pro Max

  • Member Posts: 194 ✭✭✭

    Lane: Could you click the "Details" button in the error windows, and write or show with a screen shot what is written there? It may help. But basically Logos has not registered itself with Windows in the correct way. There are ways to try to make it register itself (which it should do when it is installed), but first I want to check the details before trying that.

  • Member Posts: 194 ✭✭✭

    IIRC this only shows resources that you have and what we have in common with you, isn't that correct?

    Yes, that is correct.

  • Member Posts: 1,408 ✭✭✭

    correct.

    Ok thanks. Looking forward to you new update then ;-)

    Logos 10  | Dell Inspiron 7373 | Windows 11 Pro 64, i7, 16GB, SSD | iPhone 13 Pro Max

  • Member Posts: 148 ✭✭

    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.

    ************** Exception Text **************
    System.Runtime.InteropServices.COMException (0x80040154): Retrieving the COM class factory for component with CLSID {319A0316-DF84-4B3C-8117-349B7E98E613} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
    at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
    at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
    at System.Activator.CreateInstance(Type type, Boolean nonPublic)
    at System.Activator.CreateInstance(Type type)
    at Index_Bible_Studies.Main.UpdateApplication()
    at Index_Bible_Studies.Main.<Main_Load>b__0(Object , EventArgs )
    at System.Windows.Forms.Timer.OnTick(EventArgs e)
    at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
    at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


    ************** Loaded Assemblies **************
    mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1080.0 built by: NETFXREL3STAGE
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
    ----------------------------------------
    Index Bible Studies
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.0.0
    CodeBase: file:///E:/Logos/Bible%20Study%20Index/Index%20Bible%20Studies.exe
    ----------------------------------------
    System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1038.0 built by: NETFXREL2
    CodeBase: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1081.0 built by: NETFXREL3STAGE
    CodeBase: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1078.0 built by: NETFXREL3STAGE
    CodeBase: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------

    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.

    For example:

    <configuration>
    <system.windows.forms jitDebugging="true" />
    </configuration>

    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.

  • Member Posts: 194 ✭✭✭

    Lane: Try this:

    Open a command line window (for example with the Windows key+R, searching for the program cmd from the Start Menu, or in other ways, depending on your version of Windows - if you have trouble let me know writing what Windows version you have) and in that window type and execute the command

    regsvr32 C:\Users\<user name>\AppData\Local\Logos\Logos.exe

    putting the user name of Windows instead the angled brackets. That should fix any problems with the registration of Logos with Windows. Maybe it will fix the problem with my program as well.

  • Member Posts: 148 ✭✭

    Could it be because I have the entire program installed to an SSD? The path is:

    G:\Logos\Logos.exe

  • Member Posts: 194 ✭✭✭

    Could it be because I have the entire program installed to an SSD?

    If the program was copied there rather than being installed there (that is likely, since I don't think Logos gives you an option to change the directory during the installation), then it is certainly the reason. My program can not find Logos, because it was not registered with Windows during the installation. You could try the command

    regsvr32 G:\Logos\Logos.exe

    to see if that registers Logos with Windows properly.

  • Member Posts: 148 ✭✭

    It doesn't recognize it.

    Thank you for your help.

    Lane

Welcome!

It looks like you're new here. Sign in or register to get started.

Welcome!

It looks like you're new here. Sign in or register to get started.